When I think of an air compressor, I think of something that compresses a large amount of air through a small opening to create a large amount of pressure for using power tools. We have a small, portable air compressor that is used with a nail gun. We purchased it when building a fence, and it has really come in hand many times since. But I was recently looking for a new air compressor, and was overwhelmed by the different types on the market today. My main problem was that I didn’t understand the difference between the different types. So I did some basic research and here is what I discovered.
There are two main ways of compressing a gas, through positive displacement and through dynamics. Dynamic air compressors come in two main forms, centrifugal and axial compressors. Positive displacement compressors also come in two main forms, reciprocating and rotary. A reciprocating air compressor can be single-acting, double acting or use a diaphragm. A rotary compressor can be a lobe, liquid ring, screw, scroll or vane compressor.
Now, most of these you do not have to know anything about, but if you are a layman, you can clearly see that there is a lot more to compressors than first meets the eye. For general use with tools, an air compressor is most likely to be a reciprocating piston, a rotary vane or rotary screw compressor.
Reciprocating air compressors use pistons that are driven by a crankshaft. These types of compressors come in all sizes, from small and portable to large and industrial compressors. Some are powered by electricity, and others with an internal combustion engine.
A rotary vane air compressor uses a rotor and a number of blades in radial slots in the rotor. I do not fully understand how this works, but it has something to do with the rotor turning and the blades sliding in and out of their slots as they keep contact with the housing wall. This somehow
1636total visits,11visits today